Classic Single-channel Mic Pre-amp • The ‘ISA One’ microphone pre-amplifier delivers Focusrite's prestigious ISA transformer-based pre-amp in a rugged and portable chassis, at a groundbreaking price. It features the classic vintage microphone pre-amplifier topology from the original ISA110 module, including the Lundahl L1538 transformer and bespoke zobel network. (The original 110 pre amp formed the cornerstone of each channel of Focusrite's legendary Forte console.) Now it is available in two versions, Digital and Analogue.
ISA Series Transformer-based Pre-amplifier • Rugged portable chassis • classic Focusrite microphone pre-amplifier at lowest cost to date • Flexible Independent D.I. Channel • Independent gain control • Output for routing to an amp • Independent XLR output on rear • Switchable Impedance (4 carefully selected input impedances, including original ISA 110 setting, to suit any microphone • Optional Stereo 192kHz ADC • Can feed either sum of the two inputs to the headphones output, or an external stereo cue mix (such as a stereo mix feed from an interface) via two TRS Jack inputs on the rear of the unit • Dedicated Insert Point allows you to place extra processing between the pre-amplifier or D.I. and the optional converter, such as an EQ or compressor.
ISA TWO Classic dual mono transformer-based microphone preamplifier • You may only need a couple of mic preamps, but they need to be the very best. The ISA Two dual-mono mic pre is the ideal solution: two independent channels of the highest quality classic Focusrite mic pres, with line in and front-panel instrument inputs – no DI box required. Based on the legendary designs found in the Focusrite Forte and Studio Consoles, ISA Two is the ideal front-end for your rack • Lundahl LL1538 mic input transformer • Up to 80 dB of gain • Variable input impedance • User-calibrated metering • Front-panel instrument and rear panel line inputs • Variable cut-off high-pass filter • Rear panel balanced inserts
•Two-channels of high-quality, precision analogue-to-digital converter for ISA One
•Up to 24-bit/192kHz sample rate
•Dante connectivity via Primary and Secondary Ethernet ports provide redundancy and auto switchover in case of failure
•Two-channel XLR connection for AES3 output
•Two-channel RCA connection for S/PDIF output
•Two-channel TOSLINK connector for ADAT output
•Word Clock I/O on BNC connectors allows synchronisation with many external devices
•RedNet Control and Dante Controller software (included) allow Dante routing and control from a computer; no hardware patching required
• Eight-channels of high-quality, precision analogue to digital converter for ISA 428 MkII and ISA 828 MkII
•Up to 24-bit/192kHz sample rate
•Dante connectivity via Primary and Secondary Ethernet ports for redundancy and auto switchover in case of failure
•Industry standard eight-channel AES59 DB25 output connection for AES3
•Two TOSLINK connectors for ADAT (8 channels at up to 96kHz; 4 channels at 192kHz)
•Word Clock I/O on BNC connectors allows synchronisation with many external devices
•RedNet Control and Dante Controller software allow Dante routing and control from a computer; no hardware patching required
Pre Pack 4-Channel Mic Preamplifier. FOUR CLASSIC PREAMPS WITH DI INPUTS AND A PREMIUM EIGHT-CHANNEL A-D CONVERTER OPTION. First introduced in 1985, the ISA microphone preamp holds a reputation for outstanding transparency along with subtle warmth contributed by transformer core saturation. The addition of a variable impedance circuit allows ISA users to perfectly match the preamp with any microphone, or to use different settings creatively to shape the sound of the microphone. Unchanged for decades, the ISA microphone preamp topology offers incredible clarity and the signature Focusrite sound that makes it the top choice among many audio professionals today.
Four ISA series transformer-based preamps • Eight-channel optional A-D converter • Selectable impedance • Four front panel instrument inputs • Dedicated analogue insert points • Variable high pass Focusrite filter on every channel • Accurate LED meters on every channel catch even the fastest transients • Phantom power available on every channel • Trim control allows 20dB of extra gain with fine adjustment • Phase reverse buttons help to correct phase issues with microphones or cables • Optional A-D converters easily synchronise to external word clock
Sharing the simple mic preamp design of the original Focusrite ISA 110 module from the Focusrite Studio Console, ISA 828 MkII incorporates eight of Focusrite's classic mic preamps, with Lundahl LL1538 transformers on every input. Each channel has the option of mic or line inputs, while inputs 1-4 also feature instrument inputs on the front panel. Each mic pre has variable input impedance, to provide a range of subtly different sonic options when using microphones, including an ‘ISA 110’ setting, which replicates the impedance of the original Focusrite mic pre. Up to 60dB of gain is available, with a further +20dB of continuously variable trim, providing a huge 80dB gain range. The high-pass filter features variable cut-off frequency between 16 and 420Hz. ISA 828 MkII features high-pass filters, calibratable per-channel, six-segment LED meters, and switchable rear-panel insert points, which allow the use of inline processors such as compressors or EQs. Dedicated connectors for mic and line-level inputs allow all sources to be connected simultaneously, making ISA 828 MkII perfect for permanent installation in a rack. New to the ISA 828 MkII is an updated power supply that allows for more efficient power consumption, a reduction in heat generation, and extremely reliable operation. The optional ISA ADN8 analogue-to-digital expansion card provides eight Dante, ADAT and AES3 outputs at rates of up to 24-bit/192kHz.
64x64 Pro Tools HD™ and dual Thunderbolt™ 3 audio interface with ultra-low latency A-D/D-A conversion, Red Evolution mic preamps, up to 121dB dynamic range, ultra-low round trip latency, and expansion over Ethernet for networked audio.
58-in, 64-out Thunderbolt 3 audio interface with two Red Evolution mic pres and line-level, DigiLink, Dante, ADAT & S/PDIF connectivity. Ultra-low-latency drivers for Mac and PC provide the flexibility to use DAW plug-ins in real-time. Dual Thunderbolt ports enable daisy-chaining of devices.Includes the Brainworx bx_console Focusrite SC channel strip from the original Focusrite Studio Console, plus Red 2 and Red 3 EQ and Compression plug-ins, which accurately reproduce the sonic qualities of the original Red hardware. Also included is membership to the Focusrite Plug-in Collective.
64x64 Thunderbolt Audio Interface with 8 Red Evolution Mic Preamps and Dual Thunderbolt 2, DigiLink, and Dante Network Connectivity. Red 8Pre features both Thunderbolt 2 connectivity and dual mini-DigiLink ports allowing you the best of both Core Audio and Pro Tools|HD workflows. Take Red 8Pre on the road for location recording over Thunderbolt then connect the same interface to Pro Tools|HDX or Pro Tools|HD Native back at the studio for mixdown. The combination of low-latency conversion and driver technology allows real-time foldback mixes to be created in the DAW while you continue to use your native plug-ins. Unlike many interfaces, both mini-DigiLink and Thunderbolt 2 connectivity comes as standard, so there’s no need to buy an additional option card.
16 channels of analogue input and output with up to 119dB dynamic range on DB25 connectors wired to AES59 spec, plus two channels of AES/EBU I/O with sample rate conversion on XLR connectors. Conversion to and from the Dante network is carried out at standard rates up to 192kHz/24 bit, with pull-up/down capability • Clock source may be internal, or external via Word Clock or DARS (the latter via the AES XLR input). The unit also outputs Word Clock. RedNet A16R features soft-startup on power-up and auto-muting during sample rate alteration, to avoid audible clicks and pops. Comprehensive front-panel LEDs include PSU and network status, sample rate and per-channel tri-colour signal level indication • Dual power supplies with cable retaining clips on the power sockets are switched automatically in the event of power failure, while dual Ethernet interfaces with etherCON locking connectors can be operated either in Redundant mode, where they will switch over automatically in the event of failure, or Switched mode where additional devices may be daisy-chained to the secondary port. Operation modes, interface levels and other parameters are selected remotely.
16-channel bi-directional analogue interface for Dante networks, with additional two-channel AES3 I/O • Precision A-D and D-A conversion with 119dB dynamic range, flat from 20Hz - 20 kHz (+/- 0.15dB) • Individual input/output channel level control using RedNet Control software • Dual PSUs with locking IEC inlets.• Dual locking etherCON connectors for Primary and Secondary network connections • Power supply and ethernet redundancy with auto switchover in case of failure.• Front-panel LED indicators for PSU, network, sample rate, signal present and clock source status • Sample rate conversion on the AES3 inputs allows external equipment to run at any sample rate • Analogue I/O on four AES59 standard DB25 connectors • Digital I/O on a pair of XLR connectors (AES3) • Rear panel XLR connector can either be used as a DARS input or as a traditional AES3 audio input • BNC connectors for Word Clock input and output • Compact 1U chassis allows maximum functionality in minimum rack space • AES67 and AES70 compliant • SMPTE ST 2110 compliant when used with Dante Domain Manager (sold separately) • Full operability with Focusrite RedNet and Red interfaces, plus all Dante devices from hundreds of manufacturers • Remote control with RedNet Control, and route via Dante Control
8 Channel Line Level I/O. Companion to the RedNet A16R, the RedNet A8R adds eight remote-controlled analogue channels in and out, plus two channels of AES/EBU I/O to any Dante audio-over-IP network. RedNet A8R includes full power supply and network redundancy in a compact, rugged 1U enclosure, and is designed for applications where high levels of reliability and adherence to redundancy specifications are required. These fundamental design cons iderations make RedNet A8R suitable for live sound and broadcast applications as well as educational and recording studio operation. Featuring Focusrite’s precision 24-bit A-D and D-A conversion, RedNet A8R delivers superb audio performance with 119dB dynamic range at standard sample rates up to 192kHz, with pull up/down, and ultra-low latency.
Dante stereo monitor unit
• Compact headphone amplifier/loudspeaker Dante stereo monitoring solution
• Powerful headphone amp suits high-impedance headphones
• Line output with mute switch
• Independent headphone/line output level controls
• Integrated dual-port Gigabit Ethernet switch
• Built-in mic stand mount plus non-slip feet
• Power over Ethernet (PoE) or external PSU (supplied)
16 channels of AES/EBU connectivity to and from a Dante audio network • Redundant Ethernet networking and power supply redundancy • Compact 1U form factor • 16 Channel RedNet AES3 Interface for Dante Network • Sample Rate Conversion on all channels • Input and Output on XLR as well as DB25 • XLR Input for DARS or Digital Audio • S/PDIF 2-channel I/O • Word Clock I/O • Remote routing and control.
16-channel bi-directional digital interface for Dante networks • Individual input and output channel level control using RedNet Control software. • Dual PSUs with locking IEC inlets • Dual locking etherCON connectors for Primary and Secondary network connections • Power supply and ethernet redundancy with auto switchover in case of failure. • Front-panel LED indicators for PSU, network, sample rate, signal present and clock source status • Sample rate conversion on all input channels • Two DB25 connectors with AES59 standard configuration; each carries eight channels of AES3 I/O • RCA connectors for two-channel S/PDIF input and output. • XLR connections for alternate AES3 I/O and DARS input • BNC connectors for Word Clock input and output • Compact 1U chassis allows maximum functionality in minimum rack space • Full operability with Focusrite RedNet and Red interfaces, plus all Dante devices from hundreds of manufacturers • Remote routing and control using RedNet Control and Dante Controller