Classé par
|
|
Rotational molded polyethylene DJ Workstation . 420-Denier nylon dust cover . Heavy-duty rack rail . Molded-in carry handles . 8 space top and 2 space bottom.
|
|
|
|
|
10 space pop-up slant top, 12 space front & rear rack on wheel . Mobile audio 19" console rack with pop-up top loaded rack . High-density Polyethylene construction . Top rack is mounted on a patented system allowing the top rack rail to "pop-up" using ratchet arms to achieve the perfect angle of operation or store flat for easy transportation . 4" heavy-duty industrial casters, two of which are locking . Two levels of side handles for easy lifting to stage or truck . 10U top, available with 12U or 8U of rack mount space with front and rear rack rails . Threaded rack rail.
|
|
|
|
|
10 spaces on tilt, 2 spaces below. 19" Polyethylene Rack
|
|
|
|
|
10 spaces on tilt, 4 spaces below. 19" Polyethylene Rack
|
|
|
|
|
10 spaces on tilt, 6 spaces below. 19" Polyethylene Rack
|
|
|
|
|
10 spaces on tilt, 8 spaces below. 19" Polyethylene Rack
|
|
|
|
|
10 space pop-up slant top, 8 space front & rear rack . No wheels - use GA-300.
|
|
|
|
|
Pop-up Rolling Console Rack . Mobile audio console rack with pop-up top . Polyethylene construction . Top rack mounted on patented system allowing for it to "pop-up" using ratchets to achieve the perfect angle of operation . 4 industrial casters, two of which lock . Two levels of side handles for easy lifting . 12U top & 10U bottom . Larger 12U top accommodates most mixer cable patch configurations.
|
|
|
|
|
6 spaces on tilt, 4 spaces below, 19" Polyethylene Rack
|
|
|
|
|
8 spaces on tilt, 2 spaces below. 19" Polyethylene Rack
|
|
|
|
|
Lightweight wood, 10 space slant top, 4 space front
|
|
|
|
|
Mobile console rack with patented pop-up top loaded rack . 9mm Plywood construction with solid polypropylene exterior . Recessed latches & handles . Heavy-duty zinc plated hardware . Reinforced stackable ball corners . Top rack is mounted on a patented system allowing the top rack rail to "pop-up" using ratchet arms to achieve the perfect angle ofoperation or store flat for easy transportation . 4 Heavy-duty Industrial casters, 2 locking 2 Spring loaded recessed handles on each side for easy lifting to stage or truck . 10U Heavy-duty pop-up rack rail top, 12U front & rear . Heavy-duty threaded rack rail.
|
|
|
|
|
Same as above with 14U front & rear
|
|
|
|
|
Same as above with 16U front & rear
|
|
|
|
|
Fixed top rolling rack case 9mm Plywood with PVC exterior . 3.2mm thick front and rear rack rails . Red Penn Elcom® recessed MOL twist latches and spring-loaded rubber-gripped handles . Heavy-duty Penn Elcom® zinc-plated hardware & reinforced ball corners . Tongue an groove aluminum valance . 4 Casters 2 of which are locking . 12 space top and 12 space bottom . Fits Allen & Heath Mixer Wizard . Rear access door and cable port.
|
|
|
|
|
Gig Rig
The SKB Gig Rig series has set the standard for mixer/rack cases for more than 15 years. The 4th Generation Gig Rig raises the bar yet again. Based on the 1SKB19-R1406 Mighty Gig Rig design, the 1SKB19-R1208 Gig Rig provides more versatility than previous generation Gig Rigs.
Roto-molded of Linear Low Density Polyethylene (LLDPE), the 1SKB19-R1208 Gig Rig has a uni-body construction that is extremely durable. The 7? angled top steel rails are 12U rack spaces with extra room in the back for cable connections. The lid provides enough space for cables to stay connected as well as, space for the optional 1SKB-AV8 retractable shelf. The front facing 8U steel rails provide enough space for amps or outboard gear. 8U Rear rack rails are included for additional mounting, s...
|
|
|
|
|
The Mighty GigRig Rolling Rack System has been redesigned from the ground up. The roto molded design features a 7? angled top with 14U steel rails, extra room in the back for cable connections and ample room for larger analog and digital mixers such as the Yamaha 01V96, Allen & Heath Mix Wizard, and Mackie Onyx. The deep design allows for up to 12U of vertical rack space (6U front rails, with 6U rear rack rails).
The cover can be used as a pedestal for the Mighty GigRig which places the mixer at proper mixing height. When packed, the cover will fit over installed XLR cable connectors (top or rear mounted). The Mighty GigRig includes four over-molded lift handles and four locking casters (locks both caster roll and caster swivel).
Additional inserts have been installed on...
|
|
|